M5000 High Voltage Linear Differential Amplifier
This 5000V series linear amplifier has been designed to drive large aperture electro optic modulators. It consists of two 0.4 - 3.0 kV linear amplifiers that together produce a differential output that can be connected to either side of the modulator. This produces an optical phase change equivalent to the output from a single sided 5000V unit.
The amplifier has a bandwidth of 14KHz and a rise time of less than 5Ás.
It incorporates a 1 - 10KHz internal oscillator giving sinusoidal, triangular and square waveforms. For square wave modulation applications the positive and negative excursions of the square wave output can be precisely controlled. This differential drive technique increases the lifetime of the modulator by maintaining a zero mean voltage across its terminals.
|Output Voltage Range||400 - 3000V (each side)|
|Full amplitude Frequency Response||14 KHz|
|Small Signal Frequency Response
(10% Full Amplitude)
|Rise and Fall Time||5Ásec|
|Input Voltage||-2.5V to + 2.5V|
|Input Impedance||1000 ohm|
|Cabinet Size (mm)||220 (height), 530 (width), 340 (length)|
|Mains Voltage||110/200/240ac 50-60Hz|